? electrical datasheet* GB01SHT12-CAL april 2012 http://www.genesicsemi.com /index.php/hit-sic/baredie page 1 of 2 ? silicon carbide power schottky diode chip features ? 1200 v schottky rectifier ? 250 c maximum operating temperature ? temperature independent switching behavior ? superior surge current capability ? positive temperature coefficient of v f ? extremely fast switching speeds ? superior figure of merit q c /i f maximum ratings at t j = 250 c, unless otherwise specified parameter symbol conditions values unit repetitive peak reverse voltage v rrm 1200 v continuous forward current i f t c 235 c 1 a rms forward current i f ( rms ) t c 235 c 2 a operating and storage temperature t j , t stg -55 to 250 c electrical characteristics at t j = 250 c, unless otherwise specified parameter symbol conditions values unit min. typ. max. diode forward voltage v f i f = 1 a, t j = 25 c 1.96 v i f = 1 a, t j = 210 c 3.1 reverse current i r v r = 1200 v, t j = 25 c 0.1 10 a v r = 1200 v, t j = 275 c 6.6 30 total capacitive charge q c i f i f,max di f /dt = 200 a/ s t j = 210 c v r = 400 v 6 nc v r = 960 v 11 switching time t s v r = 400 v < 17 ns v r = 960 v total capacitance c v r = 1 v, f = 1 mhz, t j = 25 c 66 pf v r = 400 v, f = 1 mhz, t j = 25 c 10 v r = 1000 v, f = 1 mhz, t j = 25 c 8 thermal characteristics thermal resistance, junction - case r thjc assuming to-276 package 3.55 c/w *for chip size and metallization, please refer to the mechanical datasheet (must have a non-disclosure agreement with genesic semiconductor).
? electrical datasheet* GB01SHT12-CAL april 2012 http://www.genesicsemi.com /index.php/hit-sic/baredie page 2 of 2 ? figure 1: typical forward characteristics figure 2: typical reverse characteristics figure 3: typical junction capacitance vs reverse voltage characteristics figure 4: typical switching energy vs reverse voltage characteristics revision history date revision comments supersedes 2012/04/03 0 initial release published by genesic semiconductor, inc. 43670 trade center place suite 155 dulles, va 20166 genesic semiconductor, inc. reserves right to make changes to the product specificat ions and data in this document without noti ce. genesic disclaims all and any warranty and liability arising out of use or application of any product. no license, express or i mplied to any intellectual property rights is granted by this document. unless otherwise expressly indicated, genesic products are not designed, tested or authorized for use in life-saving, medical, aircraft navigation, communication, air traffic cont rol and weapons systems, nor in applications where their failure may result in death , personal injury and/or property damage.
? GB01SHT12-CAL sep 2013 http://www.genesicsemi.com /index.php/hit-sic/baredie page 1 of 1 ? spice model parameters copy the following code into a spice software progr am for simulation of the GB01SHT12-CAL device. * model of genesic semiconductor inc. * * $revision: 1.0 $ * $date: 05-sep-2013 $ * * genesic semiconductor inc. * 43670 trade center place ste. 155 * dulles, va 20166 * httphttp://www.genesicsemi.com/index.php/sic-products/schottky * * copyright (c) 2013 genesic semiconductor inc. * all rights reserved * * these models are provided "as is, where is, and with no warranty * of any kind either expressed or implied, including but not limited * to any implied warranties of merchantability and fitness for a * particular purpose." * models accurate up to 2 times rated drain current. * * start of GB01SHT12-CAL spice model * .subckt gb01sht12 anode kathode r1 anode int r=((temp-24)*0.0099); temperature dependant resistor d1 int kathode gb01sht12_25c; call the 25c diode model d2 anode kathode gb01sht12_pin; call the pin diode model .model gb01sht12_25c d + is 1.88e-18 rs 0.9255 + n 1 ikf 98.29122743 + eg 1.2 xti 3 + cjo 7.90e-11 vj 0.367 + m 1.63 fc 0.5 + tt 1.00e-10 bv 1500 + ibv 1.00e-03 vpk 1200 + iave 1 type sic_schottky + mfg genesic_semiconductor .model gb01sht12_pin d + is 2.76e-16 rs 0.84243 + n 3.791461 ikf 2.98675 + eg 3.23 xti 30 + fc 0.5 tt 0 + bv 1500 ibv 1.00e-03 + vpk 1200 iave 1 + type sic_pin .ends * * end of GB01SHT12-CAL spice model
|
